Fafeicy VC480C Digital Milliohmmeter 0.01mOhm - 2kOhm 6 Gear 4 Wire Low Resistance Tester, with Backlight LCD Display and Data Retention for Low Resistance Test

Spec: Item Type: Resistance Tester Model: VC480C+ Material: ABS Power Supply: 1.5V Battery / External DC 9V Adapter Power Supply (Battery and power Supply Not Included) Purpose: It can be used for low resistance test. Range Accuracy Resolution Test Current 20 mΩ ±(0.5% Reading±3) 0.01 mΩ About 100mA 200 mΩ ±(0.5% Reading±3) 0.1 mΩ About 50mA 2 Ω 1 mΩ 20Ω 1 0mΩ 200Ω 1 00mΩ 2kΩ 1Ω Special Function VC480C+ Low Voltage Display Approximately Lower than 7.5V Display Data Retention √ Backlight Display/Function Protection √ Sampling Rate 3 Times/Sec Operation Method Manual Range Maximum Display 1999 LCD Size Power Supply 6 x Batteries / External DC 9V Adapter Power Supply Power Consumption Quiescent Current about 6mA Package List: 1 x Resistance Tester (Battery Not Included) 2 x Four-Wire Test Lead 1 x Strap 1 x Manual How To Use: 1. The power‑on screen displays 1. Insert the two plugs of the red test lead into the two red jacks on the right and the two plugs of the black test lead into the two black jacks on the left. 2. Turn the knob switch to the desired position, first clamp the top with two test clamps, and then adjust the zero adjustment button until the screen displays zero (Note: each range should be adjusted first and then zero Test, so that the measured value is more accurate). 3. Take the measurement of a resistance with an ​ of 190 as an example, turn the revolving switch to the range of 200mΩ close to it, and clamp the two ends of the resistance with two test clamps. The measured value displayed on the screen is 19mΩ. At this time, if you press the hold switch, the current value will remain on the display, and press the hold switch again to cancel the hold function. Note: When using the resistance tester, do not touch the metal part of the test lead with your hands to ensure safety.

• [PRECISE 4 WIRE MEASUREMENT TECHNOLOGY] This VC480C digital milliohmmeter utilizes the advanced four wire measurement method (Kelvin connection) to deliver extremely accurate readings for low resistances down to 0.01mΩ.
• [COMPREHENSIVE PROTECTION & ] Engineered with a full protection function, this resistance tester boasts strong anti magnetic and anti interference capabilities to guarantee the accuracy and stability of your measurement results even in challenging environments.
• [LARGE LCD DISPLAY WITH CLEAR READABILITY] Featuring a large LCD screen with crisp handwriting and a convenient backlight function, this portable meter makes it effortless to read and record data in any lighting condition, from dimly lit workshops to bright outdoor settings.
• [INTELLIGENT CONVENIENCE & DATA MANAGEMENT] Designed for ease of use, the instrument includes practical features like data retention to hold your readings on the screen for later , a low voltage display to alert you when the battery is running low (below 7.5V), and a manual range selection mode for targeted measurements.
• [COMPACT PORTABLE DESIGN FOR ON THE GO TESTING] Its portable and lightweight construction allows you to easily carry this handheld resistance tester to various job sites, whether you are working in a factory, a laboratory, or performing field maintenance.